Advantages and operation points of peanut half-grain peeling machine
Peanut peeling equipment mainly includes dry type peanut peeling machine, wet type peanut peeling machine and peanut half-grain peeling machine. Today, let’s take a look at the peanut half-grain peeling machine.
The peanut half-grain peeling machine consists of a material box, a feeder, a sorting screen, a rubbing roller and a dust collector. This equipment is mainly designed and developed for peeling peanuts in large quantities. By peeling peanuts with red skins, cutting peanuts in half and separating peanut kernels and peanut skins into two parts, the peanut skins are collected in a dust collector, and the peanuts are transported to the discharge port. Using food-grade cots, peanut grains are extruded by two cots and rubbed at different speeds, so as to achieve the purpose of half-grain and red peel peeling of peanuts at one time.
Advantages of peanut half-grain peeling machine:
1. It has a wide range of uses, and can be used in the early production of foods such as peanut cakes, peanut candy, peanut milk, peanut protein powder, etc., with high net removal rate, regardless of the size of peanuts.
2. High degree of automation, low noise and no pollution.
3. The produced peanuts are uniform and beautiful, and consume less materials, which is an ideal choice for food processing industry. 4. Low peanut loss rate, stable performance and simple operation. 5. The machine can be used for multiple purposes, and is also suitable for peeling cocoa beans.
6. This equipment can be customized according to the customer’s capacity requirements.
Key operation points of peanut half-grain peeling machine:
1. Before starting the machine, check whether the circuit is normal or not, and whether there is any looseness of each component.
2. The processed peanuts can’t have stones and other sundries.
3. Adjust the insert plate of the feeding hopper to a proper position and control the feeding speed to ensure the peeling effect of the machine.
4. The gap between the three cots should be properly adjusted according to the size of peanuts, so as to avoid the reduction of the half-grain rate in the gap, and the half-grain will be crushed if the gap is small. Generally, the gap between the upper and middle rollers is 6-7 mm, and the gap between the middle and lower rollers is 4-6 mm.
5. Start the fan, peanuts are divided into half grains by the half-grain peeler, and the centrifugal fan sucks out the red skin.
6. Clean up the oil stain on the equipment after peeling every time to ensure the hygienic quality of the peanut half-grain peeler.
The advantages of peanut half-grain peeling machine make it the best equipment for peeling and splitting peanuts. When using the machine, we must operate it in strict accordance with the operating points to ensure the normal use of the equipment.