Common faults of peanut sheller machine in the process of use
Peanut sheller machine is a common agricultural machinery and equipment, which is used to remove peanut shells and improve the processing efficiency of peanuts. However, in the process of use, peanut sheller machine will also have some common faults, which will affect the normal operation of the equipment.

The following will introduce some common faults and solutions of peanut sheller machine.

1, Peanuts are not completely shelled.

When the peanuts are not completely shelled in use, it may be because the blade inside the equipment is seriously worn, which leads to the inability to effectively remove peanut shells. The solution is to check the blade regularly and replace the severely worn blade in time.

2, The peanut sheller is noisy.

The noise may be caused by loose or worn equipment parts. The solution is to regularly check the fastening of equipment parts and replace the seriously worn parts in time to reduce equipment noise.

3, The peanut sheller machine is blocked in use.

When the peanut sheller machine is blocked in use, it may be caused by excessive or uneven feeding. The solution is to control the feed rate, ensure uniform feed and avoid blockage.

4, The output of peanut sheller machine is low.

The low output may be caused by serious internal wear or improper adjustment of the equipment. The solution is to check the internal wear of the equipment regularly, replace the seriously worn parts in time, and make reasonable adjustments according to the different varieties and humidity of peanuts to improve the output of the equipment.

5, High shelling loss.

When using the peanut sheller machine, sometimes there will be a large shelling loss, which may be caused by unreasonable internal design or improper operation of the machine. The solution is to conduct a comprehensive inspection of the equipment, optimize the design of the peanut sheller and train the operators to reduce the shelling loss.

6, Motor overheating.

It is normal for the motor of peanut sheller to heat moderately, but when the motor is overheated, it may be caused by excessive motor load or poor heat dissipation inside the motor. The solution is to control the motor load, avoid long-term overload operation, and regularly clean the heat dissipation parts of the motor to maintain good heat dissipation effect.

In a word, there may be various faults in the use of peanut sheller machine, but as long as it is found in time and effective measures are taken to solve them, the normal operation of the equipment can be ensured and the peanut processing efficiency can be improved.