Peanut shelling machine is a kind of mechanical equipment used to remove peanut shells. When working, the motor drives the belt to realize the shelling process. However, It is necessary to take off the belt when the peanut shelling machine is not used for a long time. Why? The reasons are as follows:

First of all, when the peanut shelling machine is not used for a long time, if the belt is not removed, it may lead to belt aging. Due to long-term non-use, the belt may be deformed or aged due to long-term tension, which will affect the normal work of peanut sheller. Therefore, taking off the belt can prolong the service life of the belt, reduce the frequency of replacement and reduce the maintenance cost.

Secondly, the peanut shelling machine needs to be removed for cleaning and lubrication when it is not used for a long time. In the process of long-term use, the transmission system of peanut sheller will accumulate dust, oil pollution and impurities. If it is not cleaned and lubricated in time, it will lead to poor operation of the transmission system and even damage important components. Therefore, taking off the belt can clean and lubricate the transmission system more conveniently, ensure the normal operation of the equipment and prolong the service life.

Finally, the peanut shelling machine needs to be removed for inspection and maintenance when it is not used for a long time. Long-term use will make all parts of peanut sheller wear and loose, which needs timely inspection and maintenance. Taking off the belt can make it easier to inspect and maintain all components, find problems in time and deal with them, so as to avoid failures and potential safety hazards.

In the process of removing and storing the belt. The following points should be noted:

1. The power supply of the peanut shelling machine should be turned off before taking off the belt, and the operation should be carried out after all the components have completely stopped running.
2. According to the instructions in the operation manual, gently loosen the fixing screw or buckle at the belt joint, and carefully remove the belt.
3. When storing the belt, it should be cleaned and protected from direct sunlight or humid environment, so as to prevent the belt from aging and hardening and affecting its service life.

To sum up, when the peanut shelling machine is not used for a long time, it is necessary to take off the belt in time for storage, and clean, lubricate and inspect the equipment, so as to prolong the service life of the machine, improve the operating efficiency of the equipment and ensure the safe operation of the equipment. I hope the above contents can help you.