Peanut sheller machine is a commonly used agricultural equipment, which is used to remove the shells of peanuts and improve the processing efficiency of peanuts. When using the newly purchased peanut sheller, it is necessary to go through a running-in period to ensure the normal operation and prolong the service life of the equipment.

The following are the matters needing attention during the running-in period of peanut sheller.

1, Running-in period time.
The running-in period of peanut sheller is generally about 50 hours, and the specific time will vary depending on the equipment model. During this period, it is necessary to pay special attention to the operation of the equipment and find and solve the problems in time.
2, Equipment maintenance.
During the running-in period, special attention should be paid to the maintenance of the equipment. Before and after use every day, the equipment should be cleaned and lubricated to ensure the flexible operation of all parts of the equipment, and the seriously worn parts should be replaced in time.
3, Gradually increase workload.
At the beginning of the running-in period, do not immediately put the equipment into high-intensity work, but gradually increase the workload. This can make the equipment gradually adapt to the working state and reduce the failure caused by excessive load.
4, Observe the equipment operation.
During the running-in period, always observe the operation of the equipment. Pay attention to whether the noise, vibration, temperature, etc. of the equipment are normal. If abnormal conditions are found, stop the machine in time for inspection, and make adjustments and maintenance as needed.
5, Pay attention to equipment lubrication.
During the running-in period, the lubrication of equipment is particularly important. Check the lubrication system of the equipment regularly to ensure the adequate supply of lubricating oil. At the same time, according to the use of equipment, change the lubricating oil in time and keep the oil clean.
6, Learn operation skills.
During the running-in period, we should seriously study the operation skills of peanut sheller. Mastering the correct operation methods and precautions can improve the working efficiency of equipment and reduce the probability of failure.
7, Handle the fault in time.
During the running-in period, if equipment failure is found, it should be handled in time. Simple troubleshooting operations can be carried out, such as cleaning up blockages and adjusting parts. If the problem cannot be solved, you should contact the manufacturer or after-sales service personnel for maintenance in time.

In a word, during the running-in period of peanut sheller, we need to pay special attention to the maintenance and operation of the equipment, deal with the faults in time, ensure the normal operation of the equipment and extend the service life of the equipment. Only the equipment that has gone through the running-in period can exert the best working effect and provide higher efficiency and quality assurance for peanut processing.