Peanut butter machine (also called a peanut grinding machine) is a common equipment, which is widely used to make peanut butter, sesame sauce and other sauces. However, when using this equipment to grind different materials, we need to pay attention to some matters to ensure the normal operation of the equipment and the optimization of grinding effect.

Key Considerations When Using a Peanut Butter Machine

1. Distinguish material characteristics

Different materials have different hardness, water content and oil content. For example, peanuts contain high fat, while some grains are relatively dry. When grinding high-fat materials, the equipment may generate more heat, while grinding dry materials may require additional water or oil to prevent jamming. Therefore, the equipment setting or operation method should be adjusted according to the material characteristics before grinding.

2. Cleaning and preventing odor

If different kinds of materials are continuously ground, such as switching from peanut butter to sesame paste, the equipment must be thoroughly cleaned. Otherwise, the residue of the former material may affect the taste of the latter material. In addition, some materials with strong smell, should be cleaned especially after use, so as to avoid the residual smell affecting subsequent use.

3. Adjust the machine parameters

Peanut butter machine usually allows users to adjust the fineness of grinding. When processing different materials, the grinding gap of the machine should be adjusted according to the demand. For example, when making delicate sesame sauce, it is necessary to reduce the gap, while for the sauce with strong graininess, it can be appropriately increased.

4. Control the feeding speed

During grinding, the feeding speed should be adjusted according to the hardness of the material and the bearing capacity of the equipment. Too fast feeding may lead to overload of equipment and even damage to blades or motors; However, too slow feeding may affect efficiency. It is recommended to operate according to the suggestions in the instruction manual, and to carry out small batch testing when using it for the first time.

5. Pay attention to temperature control

Continuous use of peanut butter machine for a long time may lead to overheating of the equipment, which may not only affect the taste of materials, but also damage the equipment itself. It is recommended to stop the machine after long-term use and let it cool for a while before continuing operation. In addition, high-fat materials are easy to heat up during grinding, so the grinding time should be properly controlled to avoid overheating leading to oil separation or deterioration.

6. Regular maintenance and inspection

In order to prolong the service life of equipment, regular maintenance is very important. Clean it after each use, and check whether the blade is worn and the motor is running normally. If abnormal conditions are found, spare parts should be repaired or replaced in time.

7. Follow the operating specifications

Strictly follow the equipment instructions, and don’t overload the machine or try to process unsuitable materials, such as those with hard shells or high fiber content. Following the operation specifications can not only prolong the service life of the equipment, but also ensure the safety of use.

In a word, peanut butter machine is a multifunctional equipment, but when grinding different materials, corresponding measures need to be taken according to specific conditions. Only by proper operation and maintenance can we give full play to its performance and ensure the safety and quality of food processing.

For commercial kitchens or home use, investing in a high-quality peanut grinding machine will improve efficiency and product consistency. Follow these tips to extend your machine’s lifespan and achieve the perfect grind!