Peanut coating pans are essential machines used in the food industry to add a delicious outer layer to peanuts and other confectionery products. Below we introduce a step-by-step guide to the operation process of the peanut coating pan to ensure efficient and high-quality coating results.

The Operation Process of Peanut Coating Pan

Feeding the Coating Drum:

To begin the operation, carefully feed the tablets or peanuts that require coating into the coating drum of the peanut coating pan. Ensure that the gun bracket and spray gun are properly fixed and positioned within the pan.

Power and Air Supply:

Next, switch on the power supply to activate the peanut coating pan. If necessary, open the switches for wind supply and internal heating to ensure appropriate conditions for coating materials. These settings may vary depending on the specific requirements of the coating process.

Discharging the Coated Material:

Once the desired coating process is complete, it is time to discharge the coated material. Begin by removing the spray gun and blowing device from the drum. Subsequently, carefully remove the coating pan to facilitate the pouring out of the coated peanuts or tablets.

Important Notes for Optimal Results:

Note 1: Avoid Blocking the Tuyere and Spray Gun:

During the operation of the peanut coating pan, it is essential to strictly prohibit the use of hands or any other objects to block the tuyere and spray gun. Doing so can cause damage to these components, which may affect the coating process and compromise the quality of the end product.

Note 2: Proper Drying Conditions:

After the coating process, it is crucial to dry the coated peanuts or tablets in low temperature settings. Air drying is recommended to preserve the quality of the coating. Regularly turn the coated products during the drying process to prevent oiliness or discoloration. Avoid exposing the coated items to direct sunlight or subjecting them to high-temperature drying, as these conditions can adversely affect the coating.

Note 3: Even Distribution of Liquid and Powder:

For consistent and uniform coating, ensure that liquid additives or powder withdrawals are distributed evenly each time. Once the coated products are fully dried, it is possible to add more solution if required. However, be cautious not to use a solution with high viscosity, as this may hinder even distribution during the coating process.

KMEC is a reputable manufacturer of peanut machine equipment, boasting years of experience in the industry. If you require peanut machine equipment, we invite you to contact us for professional consultations and to explore our extensive range of superior equipment that caters to all your coating needs. Trust us to provide you with the best solutions for your business.