Peanut Machine Suppliers and Manufacturers

Operation sequence of peanut sheller machine

Peanut sheller machine is a professional equipment for removing peanut shells, which can improve the efficiency of peanut processing and reduce the labor intensity. The correct operation sequence can ensure the normal operation of peanut sheller, prolong the service life of equipment and ensure the quality of products.

Peanut Shelling Machine
6BK-4500 Peanut Shelling Machine

The following is the operation sequence of peanut sheller machine:

1. Check the equipment: Before operating the peanut sheller machine, first of all, check whether the equipment is intact, whether the components are firmly installed, whether the power supply is connected, and whether the lubricating oil is sufficient. Ensure that the equipment is in good working condition.

2. Adding peanuts: Put the peanuts to be shelled evenly into the feed inlet of the equipment to avoid equipment failure caused by blockage or excessive feeding.

3. Start the equipment: After confirming that peanuts have been put in a proper amount, you can start the peanut shelling machine and observe the operation of the equipment to ensure that there is no abnormal sound or vibration.

4. Adjusting parameters: According to the size and hardness of peanuts, the parameters of the peanut sheller, such as rotating speed and feeding speed, can be appropriately adjusted to achieve the best shelling effect.

5. Monitoring operation: During the operation of the equipment, it is necessary to observe the operation of the equipment at any time to ensure the good shelling effect and find and solve possible faults in time.

6. Collecting products: When the peanuts are shelled, the collected peanuts and shells should be stored separately for subsequent processing and utilization.

7. Turn off the equipment: When the processing task is completed, the peanut sheller needs to be turned off. First, finish processing the peanuts at the feed inlet, then turn off the power switch of the equipment, and then proceed to the next operation after the equipment stops running.

What are the difficulties of peanut sheller working in winter?
What are the difficulties of peanut sheller working in winter?

8. Cleaning and maintenance: After turning off the equipment, the peanut sheller should be cleaned and maintained. Remove the residual peanut shells and sundries inside the equipment, and keep the equipment clean and hygienic. At the same time, lubricate and inspect the equipment to ensure that all parts are in good condition for next use.

Through the above operation sequence, the peanut sheller machine can be operated correctly and efficiently to ensure the smooth operation of peanut sheller. Pay attention to safety at all times during the operation, and operate in strict accordance with the operating procedures to avoid accidents. At the same time, the equipment should be inspected and maintained regularly to prolong the service life of the equipment and improve the production efficiency.

Get in Touch

If you're interested in our products or have any questions, please let us know. Don't hesitate to contact us!

Address:

Kate Road, Anqiu City, Shandong province, China.

Phone number:

Tel: +86-372-5388851

E-mail address:

info@chinapeanutmachinery.com