Peanut Machine Suppliers and Manufacturers

Process flow of large peanut dryer with shell

The working principle of large peanut dryer with shell is based on the air source heat pump. It needs no coal, gas or oil in the operation process. Only part of the electric drive compressor is needed to work without any pollution to the air. It is an ideal product to replace the traditional drying equipment. And professional guards are not needed. The dryer can automatically adjust the temperature in 5-75 degrees Celsius. It can also achieve sterilization and other purposes at the same time of drying. The input and output ratio is high, the return is fast with good social benefits.

Peanut roaster production line
Peanut roaster production line

Heating process: in the drying process of peanuts, heat cycling of the host machine to the dryer starts. When the temperature in the drying room reaches the set value (eg. the temperature is set to 70°C), the peanut dryer stops heating. When the temperature in the drying room is lower than the set value (eg. the temperature is set to 65°C), the peanut dryer starts heating. Dehumidification system can be automatically controlled by the system according to the humidity of the drying room (eg. the humidity controller is set to 50%; the dehumidification time is set to 15 minutes, and the dehumidification fan is turned on for 1 minute to dehumidify. Then every 15 minutes, when the humidity exceeds 50%, the dehumidification fan starts for dehumidification; if the time has been to 15 minutes, but the drying room humidity is lower than 50%, the dehumidification fan is still in the closed state and does not dehumidify. After a period of time, when the humidity reaches 50%, the dehumidification fan will be turned on for 1 minute for dehumidification. Then, it will be turned off. After the dehumidification fan is turned off, the timing will be restarted for 15 minutes, and the humidity will be turned on again when the humidity exceeds 50%. It would repeat the cycle until reaching the drying requirements). The size of peanut dryer can be customized according to the customer’s actual drying volume.

Characteristics of peanut heat pump dryer:
1. Convenient installation: convenient installation and disassembly, cover less area. It can be installed indoor and outdoor;
2. Energy saving: a small amount of electricity is consumed and it can absorb a lot of heat in the air. The power consumption is only 1/3-1/4 of the heater. Compared with coal burning, oil and gas heating drying equipment, the operation cost can be saved about 75%;
3. Environmental protection and pollution-free: without any combustion and emissions, it is a sustainable development and environmental protection product;
4. The peanut dryer has safe and reliable operation and a safe and reliable drying system.

Get in Touch

If you're interested in our products or have any questions, please let us know. Don't hesitate to contact us!

Address:

Kate Road, Anqiu City, Shandong province, China.

Phone number:

Tel: +86-372-5388851

E-mail address:

info@chinapeanutmachinery.com