In the process of using almond slicing machine, it is a common but headache problem that the breakage rate of almonds becomes higher. There may be many reasons for this phenomenon. The following are some common reasons and their solutions.

1. The blade is worn or improperly installed.

Blade is one of the core components of almond slicer. If the blade becomes dull after long-term use or is improperly installed, it will lead to uneven slicing, thus increasing the breakage rate.
Solution:
-Check the sharpness of the blade regularly, and polish or replace it if necessary.
-Ensure that the blade is installed firmly and at the correct angle, so as to avoid poor cutting due to looseness or deviation.

2. The water content of almonds is not suitable.

The moisture content of almonds has a great influence on the slicing effect. Too high water content will cause almonds to be too soft and easy to be crushed and damaged; If the water content is too low, almonds will be too brittle and hard, and they will be easily broken.
Solution:
-Before slicing, properly adjust the water content of almonds to keep the water content within a reasonable range (usually 8%-10%).

3. The equipment running speed does not match.

The operation speed of almond slicing machine is too fast or too slow, which will affect the slice quality. Too fast speed may lead to uneven stress on almonds, while too slow speed may make almonds stay in the equipment for too long, thus increasing the probability of damage.
Solution:
-Adjust the running speed of the equipment according to the size, hardness and water content of almonds to ensure the smooth and efficient slicing process.

4. Almond specifications are not uniform.

If the size and shape of almonds put into the almond slicer are quite different, it will also affect the slicing effect. Larger almonds may be crushed and damaged, while smaller almonds may not be cut normally.
Solution:
-Screening almonds before slicing, and selecting almonds with uniform specifications for processing.

5. Inadequate cleaning and maintenance of equipment.

After long-term use, if residue or dust accumulates in the machine, it may affect the normal operation of the almond slicer, resulting in an increase in the breakage rate.
Solution:
-Clean the inside of the equipment regularly to ensure the smooth operation of all parts of the machine.
-Carry out maintenance according to the manufacturer’s suggestions and replace wearing parts in time.

The high breakage rate of almond slicing machine is usually the result of many factors. In daily use, the management of equipment and raw materials should be strengthened, and problems should be found and solved in time to ensure the quality and production efficiency of slicing. If the problem cannot be improved after the above adjustment, it is recommended to contact the manufacturer’s technical support for professional help.