Peanut peeling machine is one kind of professional equipment for removing red skin of the peanut. Widely used in the previous peeling procedures such as fried peanuts, spiced peanuts, peanut protein milk powder, rice porridge, pickled peanuts, canned peanuts, etc. Peanut peeling machine can be divided into dry type peanut peeling machine and wet type peanut peeling machine. Peanuts peeled by peanut peeling machine are white in color, and the surface is not browned. The protein is unchangeable, and the peels are automatically separated and removed while peeling, it is very convenient and fast. Here is a brief introduction to the use of dry type peanut peeling machine.

1. Before using the peanut peeling machine, first check whether the fasteners are tightened, whether the rotating part is flexible, whether there is lubricating oil in each bearing, and whether the peeling machine is placed smoothly. In order to ensure the safety of operators, grounding protection must also be taken for the motor casing.

2. Before electrifying, turn the peanut peeler several times by manpower. If there is a crash, find out the reason, and then electrify.

3. Appropriate screen should be selected according to the size of peanut kernels.

4. After power-on, try to run and pay attention to whether the rotor turns correctly. After the motor is started, the rotation direction of the rotor should be consistent with the direction marked on the machine. Idle for a few minutes, observe whether there is any abnormal noise, and peanuts can be put into the hopper quantitatively, evenly and continuously only after running smoothly.

5. The solution to the increase of peanut shells is to move the motor downward so as to tension the fan belt and increase the blowing amount. 6. When peeling, peanut should be fed evenly and in proper amount, and it is not allowed to have iron filings, stones and other sundries mixed in, so as to prevent breaking peanut kernels or causing mechanical accidents. When peanut kernels cover the sieve surface, the outlet switch can be turned on.

7. After the peanut peeling machine is used, before storing the machine, the dust, dirt and other sundries on the outside of the machine should be cleaned. Then, the bearings of each part should be cleaned with diesel oil. After drying, butter should be applied, and the painted parts should be painted again. After the paint dries, the machine should be covered and stored in a dry warehouse. Remove the belt and hang it on the indoor wall that is not exposed to the sun.

Our company specializes in producing all kinds of peanut machinery: peanut roasting machine, peanut peeling machine, peanut cleaning machine, peanut half-grain machine, peanut grading screen, peanut butter machine, peanut butter production line, etc. If you are interested in this product of our company, please contact us in time, and we will provide you with the best service and answer in real time!