Peanut Machine Suppliers and Manufacturers

Three commonly used peanut peeling equipment

In the process of peanut food processing, peanut peeling is a very common processing procedure, so what equipment are available for peanut peeling?

1. Dry type peanut peeling machine

Dry type peanut peeling machine

The dry type peanut peeling machine adopts the working principle of differential rolling friction transmission, peels peanuts when the moisture content is less than 5% after roasting, and then screens them with a sieve, and the peel is sucked away by an exhaust system, so that the whole peanut kernel, semi kernel and broken corners are separated. It has the advantages of stable performance, high productivity, good peeling effect and low semi-kernel rate.

2. Wet type peanut peeling machine

Wet type peanut peeling machine

Wet type peanut peeling machine consists of frame, fan, rotor, single-phase motor, screen, feed hopper, vibrating screen, V-belt pulley and its transmission V-belt. After the machine runs normally, the soaked peanuts are put into the hopper quantitatively, evenly and continuously. After vibration, the raw materials enter the rotating rubber wheel fixed by three power rollers. Under the action of the inducer and the feeding wheel, the blades on the tool rest cut the skins of the raw materials, and then the discharging wheel presses the peeled peanuts into the discharging hopper, where they are discharged, and the skins are thrown out by the peeling wheel.

3. Peanut crusher machine

Peanut crusher machine

Peanut crusher machine is mainly designed and developed for peeling peanuts in large quantities. The raw materials are extruded by two cots and divided into two parts by differential rubbing. In the process of vibration transportation, the detached red skin is separated by a low-pressure fan, and the germ is screened out, and half of the grain is discharged from the discharge port. Peanut skins are collected in a dust collector, and peanut kernels are transported to the discharge port. The peanut crusher machine is mainly used for semi-granulating peanuts and other nuts.

The above are the three main equipment for peanut peeling. In the actual production process, and which peeling equipment to buy should be determined by the actual needs. If you need peanut peeling equipment, or if you have any questions or problems in the use of peanut peeling machine or other peanut equipment, please contact us!

Get in Touch

If you're interested in our products or have any questions, please let us know. Don't hesitate to contact us!

Address:

Kate Road, Anqiu City, Shandong province, China.

Phone number:

Tel: +86-372-5388851

E-mail address:

info@chinapeanutmachinery.com