Peanut oil press is a common household kitchen appliance, which can press peanuts and other oils into oil, which is convenient for people to cook and eat. However, before using peanut oil press, many people will have a question: Is it necessary to run-in peanut oil press before use?

First, what is running-in? Running-in refers to the process that mechanical equipment gradually adapts and cooperates with each part of the equipment through friction and wear under normal working conditions when it is used for the first time, so as to achieve the best working condition. The purpose of running-in is to stabilize the performance and prolong the service life of the equipment.

For peanut oil press, there are many rotating parts, such as screws and rollers, so it is necessary to run in before the first use. Through running-in, all parts of peanut oil press can be run-in in place gradually, and wear and failure caused by friction between parts can be reduced. So, how to run in the peanut oil press? First of all, the peanut oil press needs to be thoroughly inspected and cleaned before use. Check whether all parts are intact, loose or damaged, etc. Clean the impurities and oil stains inside and outside the equipment to ensure that the equipment is clean and hygienic.

Next, we need to test run the peanut oil machine. During the test run, we can run the equipment for a period of time without adding peanuts, and observe whether the equipment runs normally, whether there is abnormal sound or vibration, and so on. If the equipment runs normally, we can gradually add proper amount of peanuts for trial operation. During the test run, it is necessary to carefully observe the working state and performance of the equipment to ensure the smooth operation and good effect of the equipment.

At the same time of test run, it is necessary to properly lubricate and maintain the equipment according to the instruction manual of the equipment or the suggestions provided by the manufacturer. Lubrication can reduce the friction and wear between parts and keep the equipment running normally. Maintenance can find and eliminate the problems existing in the equipment in time and ensure the stable operation of the equipment for a long time.