Peanut Machine Suppliers and Manufacturers

Matters needing attention in debugging peanut peeling machine

Peanut peeling machine is a kind of food processing equipment with convenient processing and high peeling efficiency. Peanut peeling machine have been debugged and installed before leaving the factory, but after purchasing the machinery, some simple debugging is also required. There are the following precautions when debugging peanut peeler machine:

Peanut peeling machine
Peanut peeling machine

First, the screws must be tightened. After the machine is debugged, the screws should be tightened to avoid loosening.  

Second, look at the steering. Turn on the power supply of peanut peeler, check whether the steering is accurate, and check the electric switch, so as to avoid damaging the machine by reversing for a long time.

Third, the lower idler can’t move.

Fourth, both ends of the upper roller are scaled evenly at the same time, not just one side.

Peanut peeling machine will be more convenient and the work efficiency will be higher only after debugging. If you have other problems and questions in the use of peanut peeler machine, you can contact us at any time.

Get in Touch

If you're interested in our products or have any questions, please let us know. Don't hesitate to contact us!

Address:

Kate Road, Anqiu City, Shandong province, China.

Phone number:

Tel: +86-372-5388851

E-mail address:

info@chinapeanutmachinery.com